By ZJESL | 04 February 2023 | 0 Comments

LED lamp bead quality assessment of 8 methods


1, chip radiation power difference
Take a certain type of SAN 'an LED chip as an example. The chip size is 23X10mil, and this chip has 4 radiation power levels (I=20mA). The higher the radiation power is, the brighter the lamp bead will be made.
2. The difference of lamp bead support materials
At present, there are aluminum bracket, iron bracket, brass bracket, copper bracket and so on. Aluminum bracket is the cheapest, copper bracket is the most expensive, the price difference is more than ten times. Even copper bracket, silver plating price also has high and low points, the market is generally called a good bracket, most of the brass plated silver.
3. The difference of chip size
Chip size is usually measured in mil. In general, the larger the chip, the brighter it will be. But without a high-powered measuring microscope, it is not easy to tell the difference in chip size.
4. The difference of welding wire materials
The chip and bracket are welded with gold wire to complete the electrode connection. At present, there are two kinds of alloy wire and pure gold wire commonly used in the market. The pure gold wire is better.
5, the difference between phosphors
Both materials have advantages and disadvantages, which material to choose is a matter of consideration!
6. The difference between glue
The phosphor is to be mixed with glue in the point on the chip, the quality of the glue directly affects the LED light decay and color drift, the quality of the glue is easy to vulcanize, light decay increase, LED light life reduction!
7, spectrum, color separation and pressure specifications
Spectral: brightness, lumen or light intensity classification. The light source used for lighting generally adopts lumen classification.
Color separation: color temperature classification, such as 3200K-3350K for a first gear. The regular packaging factory will provide the BIN code of the color temperature, the smaller the color temperature classification, the better. The color temperature is small, and the color consistency of the light source is good. Public number: Shenzhen LED network
Voltage divider: Voltage divider, such as 3.0V-3.15V. If the light source is connected in series and parallel, the voltage divider should be controlled within 0.15V. In this way, the current distribution of the light source is even and the service life of the light source is improved.
8, LED chip electrode map
In the LED lamp bead supply market, the most problems are brightness false label, chip size does not match, fake brand chip, with iron bracket posing as copper bracket, etc. These problems can be identified by the above 8 methods, and can also be detected by professional LED detection institutions.

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code
ver_code