By ZJEST | 13 April 2022 | 0 Comments

Pretend bility. Eight applications of LEDS in space

Do you know what applications leds have in space?

In China, the application of LED in space is mainly responsible for military research institutions and military enterprises. The military application of LED has been introduced on the second day of army Day and parade. Now let's look at the application of LED in space between China and the US.

China is the first country in the world to use LED in space lighting since shenzhou VII spacecraft (2008). Space lighting includes cabin lighting, cabin lighting, rendezvous lighting, rendezvous is shenzhou spacecraft and Tiangong-1 rendezvous and docking.

The U.S. may be more sophisticated than China in using leds initially for space farms, and has spawned other new applications.

1. Cabin lighting

At present, the general lighting source in the international Space Station cabin is fluorescent lamp. Fluorescent lamp technology is mature, stable performance, high reliability, and has the characteristics of high luminous efficiency, uniform luminous, low surface brightness. But its disadvantages are: mercury, with stroboscope, not easy to dimmer, short maintenance cycle. White light emitting diode (LED) as a new type of lighting source, very suitable for space mission for the lighting system of high reliability and safety requirements, replace fluorescent lighting has many advantages: to hold small volume, high luminous efficiency, fast startup time, start the wide temperature range, low work voltage, no stroboscopic light after, do not contain mercury; LED is easy to design special light distribution, high efficiency of secondary optical system; Seismic impact resistance; Easy color and brightness control.

China uses LED cabin lighting, not only low temperature resistance, but also vibration resistance. The temperature difference in space is very large, the change of day and night is very obvious, the temperature at night is very low, the particle radiation in space is very strong, through the special technology of LED lamp to achieve high reliability, high stability. All the lighting in each cabin comes from a small lamp at the top, which uses just a few watts of power, saving space, load and energy for the spacecraft. Due to the long day and night, the space LED lamp also has the function of "dimming", which can be adjusted according to the astronauts' daily life status.

2. Exit lighting

Exit lighting plays an important role in astronaut spacewalk. After the spacecraft enters orbit, there is a period of time in the shadow of the earth, when it is very dark outside the cabin, astronauts walking out of the cabin must have a light source for lighting, the camera system also needs lighting. Foreign countries generally use metal lamps to provide space exit lighting, China uses LED. LED has the advantages of high luminous efficiency, strong reliability, good seismic performance, theoretically up to 100,000 hours of service life, light color, structure can be flexibly adjusted.

Chinese LED exit lighting solves the following technical difficulties :(1) the outer space environment is very complicated, the temperature in the shadow area may be 60 or 70 degrees Celsius below zero, the temperature in the sunshine area is very high, and there are many kinds of space radiation and static electricity, so the lighting must withstand these harsh conditions. (2) Secondly, there is no air in outer space, so the lighting source cannot dissipate heat by air convection as it does on earth, and metal conduction and thermal radiation cooling technologies should be fully used. (3) Space lighting system should achieve "high efficiency, small power consumption".

The LED exit lamp looks like a square box, but the luminous surface is a polyhedron with a certain radian. The function is to concentrate the light into the irradiation area, and the lighting Angle is 160 degrees left and right, 90 degrees up and down. It contains 24 light sources and consumes a total of 27 watts. Such a high-tech lighting system, the size is not big, placed in a wide about 20 centimeters, 10 centimeters high, thick about 6 centimeters "box" inside, weight about 1.8 kilograms.

3. Rendezvous lighting

The shenzhou spacecraft docked with Tiangong-1 in the shadow of the earth, in total darkness. When docking, there will be a big collision, and LED lights have stood the test, providing a guarantee for rendezvous and docking.

In the process of shenzhou spacecraft and Tiangong-1 docking, it is necessary to adjust the orbit and attitude according to the predetermined strategy, so that Shenzhou spacecraft and Tiangong-1 on time, gradually close, through rendezvous and docking sensors to complete ranging and aiming, the distance between the two gradually reduced to 0, complete rendezvous and docking. The docking sensors mainly include microwave radar, laser radar and CCD optical imaging sensor.

CCD optical imaging sensor is composed of marking subsystem, camera subsystem and signal processing subsystem. The logo subsystem, installed on tiangong-1, is a graphic of multiple light-emitting diode (LED) target lights. LED has low power consumption, small size, light weight and little influence by ambient temperature changes. It is very suitable for light emitting devices as sign lights. The signal lights are divided into far-field signal lights and near-field signal lights, which are assembled on the outer surface of the cabin near the docking port of the front cone section of tiangong-1 laboratory module. The far field sign lamp is in the outer ring, and the lamps are far away from each other to ensure the measurement accuracy at a longer distance. The near field sign lamp is in the inner ring to adapt to the field of view of the CCD sensor lens at a shorter distance. With the beacon, the spacecraft can dock in all weather, even on the sunny side. In order to effectively eliminate sunlight and other stray light interference, LED target lights emit light in the near infrared band.

Space Farm

Growing food in space is a good solution to one of the biggest challenges of long-haul space travel: the supply of fresh food. In the short term, it is a cost-cutting measure - it costs around £14,000 to ship 1kg of food to the ISS, mostly calorie-rich and long-lasting, with very little fresh food, particularly fruit and vegetables.

Based on the special requirements of space environment, the light source used for plant cultivation must have the characteristics of high luminous efficiency, the output spectrum matching the needs of plant photosynthesis, small size, light weight, long life and no pollution, etc. With these basic characteristics, LED is the most ideal artificial light source for space agriculture.

NASA is providing space-grown edible vegetables to astronauts aboard the International Space Station through a program called The Vegetable Production System. The first six lettuces will be planted with pink LED lights for photosynthesis. Lettuce has a short growth cycle in space. Once grown, it RIPS up to edible size after 28 days.

When it comes to meat, it may be impractical to raise large animals in the confined space of a space capsule, and Chinese scientists have recommended tiny silkworms. They believe that silkworms have high protein content, short growth cycle, high bioconversion efficiency, small space for activities, low odor and no waste water in the process of rearing silkworms. Therefore, silkworms may be the best candidate for animal protein for space travel.

5. Gardening therapy

According to the Horticultural Society of New York, which has been treating residents of Lex Island with horticultural therapy since 1989, the benefits of caring for plants are numerous, such as "reducing stress, improving mood, alleviating depression, promoting social association, improving physical and mental health" and general health.

In the vastness of space, even the toughest astronaut can be pushed to the breaking point. Space farms don't just grow plants for food, they also serve as an emotional object: horticultural therapy. In this way, the astronauts live in the airtight cabin, they do not feel lonely and lonely, more excited and proud.

Regulate sleep

Rhythm Downlight from Lighting Science is not just a light-emitting LED bulb, it also affects the user's state of mind. NASA deploys similar technology on the International Space Station to help astronauts regulate their sleep -- at 28,160 km/h, astronauts will see 16 sunrises and sunsets every 24 hours.

It was found that blue light with wavelengths between 446 and 477 nanometers inhibited melatonin production. Lighting Science's engineers programmed Rhythm Downlight Settings based on the results, including "wake up mode" (more blue light) and "relax mode" (no blue light). The technology is not just for astronauts, but for ordinary people as well. Users can add their own schedule through the app, so that they can stay in good spirits while working and living, especially in the afternoon and evening.

7. Heal wounds

After determining that leds could be used to grow plants in space, NASA is also studying leds for use in photobiomodulatory therapy (PBMT). PBMT is a new medical technology that stimulates or suppresses cellular activity by exposing the body to high intensity, specific wavelengths of light. PBMT regulates the body's cellular organs (such as mitochondria, vacuoles and chloroplasts, etc.), uses photon energy of specific wavelength at the cellular level to enhance respiration, reduce natural inflammation symptoms, speed up wound healing and stress, and promote metabolism. At present, this technology has been extended from aerospace to civilian commercial.

8. Ink source

NthDegree, a startup based in Arizona that develops inorganic printing and flexible semiconductors for lighting, solar and energy storage applications, is working with NASA to develop "lightweight, low-power" light sources.

The light source uses innovative semiconductor inks developed by NthDegree. NthDegree claims to have developed a proprietary method for transferring semiconductor inks, which contain functional components such as diodes and transistors using traditional wafer manufacturing processes, onto substrates. The solid-state lighting device is made of miniature leds on standard InGaN heteroepitaxy and dispersed in ink adhesive. A flexible letterpress, 60 centimeters wide, can print 75 meters per minute and run 300 days A year. A 20-hour day is equivalent to about 250 million A-19 light bulbs.

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code
ver_code